Home > Products > Tactile Transducers and Shakers >

ButtKicker Racing Simulator Kit

ButtKicker Racing Simulator Kit


 
Alternative Views:


List Price: $219.99
Your Price (USD): $219.99
Compatability: PC, PS3, PS4, Xbox
Ships by: Unknown

Item #: BKK-BK-SK

Description Technical Specs Downloads
 
Designed specifically to fit the RS1 simulators and other sim-racing chassis, this kit includes the Buttkicker miniConcert, a bolt-in amplifier designed to mount under the RS1 platform and rubber isolation feet keep the simulator de-coupled from the floor. ButtKicker brings racing simulators to life with the Simulation transducer kit. Enter the 4th dimension of sound in under an hour! Take a look at what's included:

ButtKicker Mini Concert Transducer
A ButtKicker® miniConcert low frequency effect audio transducer that is based on the larger BK-LFE tactile transducers (that have received with rave reviews around the world since they were introduced in late 1999). The BK-miniConcert is designed as a highly efficient, single seat transducer that requires minimal power and attaches directly to the simulator chassis (hardware sold separately, see the Related Items section). The magnetically suspended piston design pushes the resonant frequency of each ButtKicker transducer down to an ultra-low 9 Hz, allowing for a truly infrasonic, and usable, frequency range of 10 to 350 Hz! While other transducers produce their peak output at 60 to 80 Hz, ButtKickers are still going strong up to three octaves lower. Experience realistic tactile effects such as engine rumble, gear shifts, track bumps and crashes the way you never knew you could on your racing simulator; all without disturbing others in the same room!

Class D Amplifier
The ButtKicker bolt-in mini digital power amplifier is specifically designed as the perfect power partner for a miniConcert transducer. Awesome features that are built-in: 2-ohm stability, variable 40 to 160 Hz low pass filter, a switchable 25 Hz rumble filter, and binding post speaker terminals. A Class D amplifier topology was chosen for this amplifier to keep efficiency high, and for its ability to be convection cooled with no need for a distracting cooling fan. One LFE RCA audio input, with 75 mV sensitivity, is paralleled to an RCA audio output for daisy-chaining amplifiers or connecting powered subwoofers. In addition to the faceplate controls, intensity can be controlled from your seat using the included wired remote control. Banana plugs are included for quick connection and convenience.

Accessories
ButtKicker has included the cables you need for maximum system connectivity: a dual male to single female RCA Y-adapter, a 3.5 mm Y-adapter, a 5 ft. male-to-female RCA patch cable, and a 5 ft. stereo 3.5 mm male to stereo RCA adapter cable. Six RI-4 rubber isolators are included for isolating your simulator or simulator platform for maximum effect, as are six cable ties to keep the 10 ft. of 14 AWG speaker wire captive. Mounting hardware not included.


This unit is for 120 volt countries such as USA and Canada.
Features
  • 90 Watts rms @ 2 ohms
  • Wired remote control
  • Class D switching technology
  • Variable high cutoff, 40-160hz
  • Low cutoff, 25hz switchable
  • Five way binding post output
  • Convection cooling (fanless)

Average Rating: 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
Awesome! March 2, 2016
Reviewer: David from brick, NJ United States  
bought it for racing games mainly, but found that its awesome with everything from games to music to movies. takes alil audio knowledge to set up and works 100x better with a pair of headphones. received mine from ricmotech in less than a week. couldnt be happier.  I'm actually thinking of getting another

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
AWESOME January 17, 2016
Reviewer: Duane McCarthy from Deer Lake, NL Canada  
Very pleased with the product, exceeded expectations, simple to hook up and works great. Awesome customer service, all I can say is Ricmotech is Top Notch. Thanks

The Buttkicker is such an improvement to the overall effect to simracing, it won't disappoint.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Better with Tactile responce March 11, 2015
Reviewer: Anonymous Person  
I am very happy with my Buttkicker. I like the tactile response it gives in my games.. I would recommend it highly to any gamer..

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Buttkicker sim kit w/ 90w amp February 27, 2015
Reviewer: Greg MASTON from Oklahoma City, OK United States  
This is a great product for my small simulator. The transducer seems to be of a good quality with plenty of power to produce the desired effect on my Ricmotech RS1 DIY racing sim. Installation was a piece of cake with easy to follow directions and everything that I needed for installation  (except tools) included in the kit. The price was right in line or better than elsewhere on the web. Very happy with the product and service.

Was this review helpful to you?