Home > Products >

Ricmotech Hard-Mount Adapter for T150 and TMX Wheels

Hard-Mount adapter for T150 and TMX wheels

Alternative Views:

Your Price (USD): $24.95
Compatability: T150 and TMX Wheels

Item #: RMT-T150HMP


Folks, this is a simple device to hard mount the Thrustmaster T150 and TMX wheel bases. Thrustmaster designed these wheels to be clamp-on only. Under use the clamp works its way loose during racing. This adapter solves this problem. The adapter simply bolts to the bottom of the wheel base in the same place the clamp mounts to it and give you hard mount points to attach to. These hard mount points are located in the same spot as the ones for the other Thrustmaster wheels. Bottom line, this is a simple solution to a simple problem.

  • Made from solid industrial polyethylene
  • Mounts to predrilled Thrustmaster holes on most rigs
  • Includes screws and instructions

Average Rating: 5 of 5 Total Reviews: 40 Write a review »

  0 of 0 people found the following review helpful:
T150 Hard mount adapter February 19, 2018
Reviewer: Marvin Joseph from Wingerworth, Derbyshire United Kingdom  
I received the adaptor within 2 weeks of ordering despite deliverin to the UK. I was kept upto date on a regular basis on the status of my order and the response to any questions I had were dealt with promptly.
The adaptor fitted to the Wheelstand pro perfectly and my son is now enjoying playing his racing aims.
A very minor point but an improvement might be to add an additional 1 or two holes to improve the rigidity. And the holes could be countersunk to achieve a flush finish.
However I am very satisfied with the adaptor. Just a shame this was not standard from thrustmaster.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Hard-Mount Adapter for TMX February 10, 2018
Reviewer: Matti Someroja from Helsinki, n/a Finland  
The product does what it promises. The thread parts for the mount screws didn't fit the slots milled in the disk though but because of the soft surface material I could just carve the slots to shape and it only took a couple of minutes. Thinking back the thread parts might've actually sunk in the material had I just started tightening the screws instead of trying to fit the parts to the slots.

All-in-all, money well spent and I don't have to worry about my TMX getting loose on my Wheelstand anymore.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
February 9, 2018
Reviewer: Stephen Anderson from Raleigh, NC United States  

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Works good with little tweaking February 2, 2018
Reviewer: Eerik from Tallinn, Estonia  
Arrived fast, 2 weeks to Europe, Estonia. It does not fit "out of the box" with T150 wheel. But after 30 minutes with sharp knife its all good. Holes/edges need some adjustment to fit perfectly, but when it is fixed it works like a charm.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Good communication February 1, 2018
Reviewer: shant garabedian from rio rancho, NM United States  
Even though when I bought the part it wasn't in stoc. But they emailed me right away and let me know. I still waited for it and it came very quickly. Thanks again the only bad part was I asked if a shifter would be in stock and they never got back to me

Was this review helpful to you?

View All Customer Reviews