Home > Products >

AP-Xtreme Sim Chassis Only

AP-Xtreme 1000 Racing Simulator Chassis
Wheel, pedals, shifter and seat not included

Alternative Views:

Your Price (USD): $1,190.00
Availability: Made to Order

Item #: APX-1000


Our most innovative simulator chassis yet. The sexy lines of the new Ricmotech AP-Xtreme chassis (APX-1000) cleverly disguises the slotted utility track with industrial HD polyethylene panels making this the most versatile sim-racing chassis ever created. The utility track (commonly referred to as t-slot or 80-20) gives this chassis the ability to mount practically any form of sim-racing hardware that exists. This barebones chassis is ready to mount all your existing gear.

Proper Driving Position

Ergonomically Correct

From its inception, the chassis was designed to have the proper GT racing position. Instead of the "bus driver" position common to most other simulator chassis on the market, Ricmotech has taken careful measurements of real-world race cars and developed a sleek design while staying true to reality. After all, the entire reason for sim-racing in a chassis is to place ourselves in the proper racing position, so why would anyone settle for the "bus driver" position?

Apex Adjustability


Proper ergonomics puts the driver in the right position, but to get it perfect requires adjustability. Each critical element of the driving controls is designed to be individually adjustable. Not only does this permit getting every control situated in the right spot, but also accommodates various types of control which vary in angle or dimension. This adjustability is key in having a chassis that is completely upgradable for any hardware the future may bring.

  • Wheel: Up/Down, Front/Back, Tilt
  • Seat: Front Up/Down, Back Up/Down, Slide Front/Back, Recline
  • Pedals: Front/Back, Tilt
  • Shifter: Front/Back



The AP-Xtreme chassis was designed to mount virtually any type of sim-racing hardware available, either directly or by the use of an accessory bracket. For example, The stock wheel deck is pre-drilled to mount various wheels while the included pedal deck can mount various pedals in the inverted position.

Wheel deck can mount:

  • Logitech G25/G27/G29/G920 wheels
  • Thrustmaster T-Series wheels
  • Fanatec Porsche and CSR wheels
  • Fanatec Club Sport wheel without adapter
  • Bodnar Sim Steering wheel
  • Ricmotech MiniMite wheel
  • Clark Synthesis tactile transducer

Shifter plate can mount:

  • Logitech G25/G27/Driving Force shifter
  • Thrustmaster TH8RS and TH8A shifter
  • Fanatec ClubSport shifter (with optional bracket)
  • Thrustmaster TSS Sparco Sequential shifter (with optional bracket)
  • Quaife Sequential shifter (with Ricmotech bracket)
  • Quaife H-Pattern shifter (with Ricmotech bracket)

Seat bracket can mount:

  • Simulator seats available from Ricmotech
  • Any Flat bottom aftermarket seat

Pedal deck can mount:

  • Inverted Logitech G25/G27/G29/G920 pedals*
  • Inverted Thrustmaster T500RS/T3PA-PRO and T3PA pedals*
  • Fanatec Clubsport floor mount pedals in inverted position*
  • RealGear GTpro floor mount pedals
  • RealGear GTpro suspended pedals (with optional bracket)
  • Any flat-floor mount sim pedals
*requires modification to the pedals

Included Extras:

  • Suspension Feet for enhanced effects from tactile transducers and wheels
  • Four Corner Surround Speaker Mounts
  • Media Keyboard Tray
  • Drink Holder

Apex Upgradability


This chassis is designed to be fully upgradable. Not only can you upgrade the wheel pedals and shifter, but you can upgrade to any and all the accessories below. The simplicity of the slotted rails allows a multitude of options to be added. It truly is the ultimate in modularity.

  • Single on-board monitor mount
  • Triple on-board monitor mount
  • Switch and button panel
  • Hand Brake
  • Multiple ButtKicker, Earthquake and/or Clark Synthesis shakers
  • Instrument cluster

View the Full AP-Xtreme Features Matrix
  • Aluminum and polymer construction
  • Vibration isolation feet
  • Low inertia for higher effectiveness of tactile shakers
  • Fully adjustable pedal, wheel, shifter and seating position
  • Min Length: 62 inches (157.5 cm)
  • Width: up to 34 inches (86.5 cm)
  • Height: 30 inches (76.5 cm)

Other Suggested Items
AP-Xtreme 4th Monitor Mounting Post for APX2000 and APX3000 AP-Xtreme Oculus CV1 Sensor Mounting Post for APX2000 and APX3000 AP-Xtreme Mounting Bracket for Wilwood Suspended Pedals AP-Xtreme SlipSense Full-Motion Upgrade for APX1000+ Simulators
Your Price (USD): $145.00
Your Price (USD): $89.50
Your Price (USD): $229.00
Your Price (USD): $3,265.00
Ricmotech 4th Monitor Mounting Post AP-Xtreme Oculus CV1 Sensor Mounting Post APX Mounting Bracket for Wilwood Suspended Pedals Ricmotech APX SlipSense Motion Platform

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 March 25, 2020
Reviewer: Paul Fridman from Tustin, CA United States  
Very well engineered.  Some of assembly instructions were great, but lacking in a few spots.  Overall excellent.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 As expected September 19, 2018
Reviewer: Joshua Collins from Anna, TX United States  
I started out with the APX 500 which is a very good chassis but the upgrade to the APX 1000 is definitely worth it. I have owned several chassis over the years but this is by far my favorite.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 Good design, quality manufacturing June 4, 2018
Reviewer: Sergey K from Bothell, WA United States  
I am using APX1000 with Fanatec CSL Elite and CS V3 pedals.  I enjoyed putting it all together and I am enjoying sim racing with this combo.
Good job!

Was this review helpful to you?