Home > Products >

Ricmotech AP-Xtreme 3000UW Wide Triple Monitor Bare Chassis Only

Triple Ultra-Widescreen Sim Racing Chassis
Wheel, pedals, shifter, seat and monitors not included


 
Alternative Views:


View the Full APX-Series Features Matrix
Your Price (USD): $2,095.00
Availability: Made to Order


Availability: Usually Ships in 4 to 6 Weeks
Item #: APX-3000UW

Description
 

The search for the ideal chassis-mounted triple-monitor chassis is over. The sexy curves combined with modular rails means this chassis looks good while mounting all the gear you can dream of. This chassis is designed to mount triple monitors up to 35 inch 21:9 ultra-widescreen configurations on its super-strong K-structure.


Proper Driving Position

Ergonomically Correct

After careful research of race and road performance cars, we found that most other rigs miss the proper driving position. The AP-Xtreme sim-racing chassis are designed with racing in mind and is therefore created to mimic the proper driving position. Race cars place the seat low to keep the center of gravity as low as possible while placing the pedals directly in front of the hips for maximum control. So don't drive in the "truck driver" position when you are really looking for racing simulation.

Apex Adjustability

Adjustability

While ergonomics brings every part of the controls within the proper range, it all has to be fine-tuned to fit each driver's particular body dimensions. This sim-racing cockpit was created to have all the controls adjustable to within the capabilities adjustable in real race cars. Much the same way that a race car if fitted to the driver, the Apexx chassis can also be fitted to the driver.

  • Wheel: Up/Down, Front/Back, Tilt
  • Seat: Front Up/Down, Back Up/Down, Slide Front/Back, Recline
  • Pedals: Front/Back, Tilt
  • Shifter: Front/Back
  • Monitor: Up/Down, Front/Back, Side Angle

Compatability

Compatibility

The Ricmotech APX3000 was designed to mount virtually any type of sim-racing hardware available, either directly or by the use of an accessory bracket. For example, The stock wheel deck is pre-drilled to mount various wheels while the included pedal deck can mount various pedals in the inverted position.



Wheel deck can mount:

  • Logitech G25, G27, G29 and G920 wheels
  • Thrustmaster T-Series wheels
  • Fanatec Porsche and CSR wheels
  • Fanatec Club Sport wheel without adapter
  • Bodnar Sim Steering wheel
  • Ricmotech MiniMite wheel
  • Clark Synthesis tactile transducer

Shifter plate can mount:

  • Logitech G25, G27 and Driving Force shifter
  • Thrustmaster TH8RS and TH8A shifter
  • Fanatec ClubSport shifter (with Fanatec Clamp)
  • Thrustmaster TSS Sparco Sequential shifter (with optional bracket)
  • Quaife Sequential shifter (with Ricmotech bracket)
  • Quaife H-Pattern shifter (with Ricmotech bracket)

Seat bracket can mount:

  • Simulator seats available from Ricmotech
  • Any Flat bottom aftermarket seat
Pedal deck can mount:
  • Thrustmaster T3PA & T500/T3PA-PRO pedals*
  • Logitech G25/G27/G29/G920 pedals*
  • Fanatec Clubsport floor mount pedals*
  • RealGear GTpro floor mount pedals
  • RealGear GTpro suspended pedals (with optional bracket)
  • Any flat-floor mount sim pedals
*requires modification to pedals

Monitor Structure can mount:

  • Monitor angle adjustable from 43 to 60 degrees
  • For monitors up to 20 lbs (10 kg) each
  • Mounts displays with VESA 75x75 up to 400x200 mounting patterns.
  • Suitable for 21:9 and 16:9 displays
  • Triple 21:9 Displays up to 35 inches
  • Triple 16:9 Displays up to 43 inches diagonal

Included Extras:

  • Suspension Feet for enhanced effects from tactile transducers and wheels
  • Four Corner Surround Speaker Mounts
  • Media Keyboard Tray
  • Drink Holder

Apex Upgradability

Upgradability

This chassis is designed to be fully upgradable. Not only can you upgrade the wheel pedals and shifter, but you can upgrade to any and all the accessories below. The simplicity of the slotted rails allows a multitude of options to be added. It truly is the ultimate in modularity.

  • Switch and button panel
  • Hand Brake
  • Multiple ButtKicker, Earthquake and/or Clark Synthesis shakers
  • Instrument cluster
Features
  • Aluminum and polymer construction
  • Vibration isolation feet
  • Low inertia for higher effectiveness of tactile shakers
  • Fully adjustable pedal, wheel, shifter and seating position
  • Min Length: 62 inches (157.5 cm)
  • Max Length: 74 inches (188 cm)
  • Width: up to 62 inches (157.5 cm)
  • Height: 38 inches (96.5 cm)

Other Suggested Items
AP-Xtreme Mounting Bracket for Wilwood Suspended Pedals AP-Xtreme 4th Monitor Mounting Post for APX2000 and APX3000 AP-Xtreme Oculus CV1 Sensor Mounting Post for APX2000 and APX3000 AP-Xtreme SlipSense Full-Motion Upgrade for APX1000+ Simulators
Your Price (USD): $229.00
Your Price (USD): $145.00
Your Price (USD): $89.50
Your Price (USD): $2,950.00
APX Mounting Bracket for Wilwood Suspended Pedals Ricmotech 4th Monitor Mounting Post AP-Xtreme Oculus CV1 Sensor Mounting Post Ricmotech APX SlipSense Motion Platform

Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  1 of 1 people found the following review helpful:
 
Overall Sim January 11, 2018
Reviewer: Bill Handler from Palm Beach Gardens, FL United States  
The overall sim is really impressive

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
APX3000UM October 31, 2017
Reviewer: Marty Spears from Hays, NC United States  
This is a great product very detailed instructions. The sitting position very comfortable. I'm looking forward in adding the slipsense sometime soon!!!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Rock Solid November 29, 2016
Reviewer: Robert Hunt from Lexington, KY United States  
I couldn't be more pleased with my APX3000 Wide Chassis!  The adjustability and positioning is perfect and it has no problem with the weight of three 40" displays.

Ricmotech has been a pleasure to work with.

Was this review helpful to you?