Introducing the newest simulator chassis to join the AP-Xtreme family, the AP-Xtreme Lite. This chassis was created for those applications where only the basic controls are needed. It can hard-mount most wheels available on the market, most floor mount pedals, and even has an adjustable shifter mount. The chassis lets you mount any seat you choose so you can personalize the simulator to your tastes. Choose any of the ProCar seats available here or mount your own.
Since the AP-Xtreme Lite Bare sim chassis is built on the proven AP-Xtreme platform, the chassis can be converted in the future to the APX-1000/2000/3000. The major components are shared with its big brothers, so it can expand with you as your passion grows.
The sexy lines of the new AP-Xtreme Lite bare sim chassis cleverly disguises the slotted utility track with industrial HD polyethylene panels, making this the most versatile sim-racing chassis ever created. The utility track (commonly referred to as t-slot or 80-20) gives this chassis the ability to mount practically any form of sim-racing hardware that exists. This bare chassis is ready to mount all your essential sim-racing gear.
From its inception, the chassis was designed to have the correct GT racing position. Instead of the "bus driver" position common to most other simulator chassis on the market, Ricmotech has taken careful measurements of real-world race cars and developed a sleek design while staying true to reality. After all, the entire reason for sim-racing in a chassis is to place ourselves in the proper racing position, so why would anyone settle for the "bus driver" position?
Proper ergonomics puts the driver in the right position, but to get it perfect requires adjustability. Each critical element of the driving controls is designed to be individually adjustable. Not only does this permit getting every control situated in the right spot, but also accommodates various types of control which vary in angle or dimension. This adjustability is key in having a chassis that is completely upgradable for any hardware the future may bring.
- Wheel: Up/Down, Front/Back, Tilt
- Seat: Front Up/Down, Back Up/Down, Slide Front/Back, Recline
- Pedals: Front/Back, Tilt
- Shifter: Front/Back
The AP-Xtreme chassis was designed to mount virtually any type of sim-racing hardware available, either directly or by the use of an accessory bracket. For example, The stock wheel deck is pre-drilled to mount various wheels while the included pedal deck can mount various pedals in the inverted position.
Wheel deck can mount:
- Logitech G25/G25/G27/G29/G920 wheels
- Thrustmaster T-Series wheels
- Fanatec Porsche and CSR wheels
- Fanatec Club Sport wheel without adapter
- AccuForce wheel
Shifter plate can mount:
- Logitech G25/G27/Driving Force shifter
- Thrustmaster TH8RS and TH8A shifter
- Fanatec ClubSport shifter (requires Fanatec Clamp)
Seat bracket can mount:
- Simulator seats available from Ricmotech
- Any Flat bottom aftermarket seat
Pedal deck can mount:
- Thrustmaster T3PA & T3PA-PRO floor mount and inverted pedals
- Logitech G25/G27/G29/G920 pedals
- Fanatec Clubsport floor mount or inverted pedals
This chassis is designed to be fully upgradable. Not only can you upgrade the wheel pedals and shifter, but you can upgrade to any and all the accessories below. The simplicity of the slotted rails allows a multitude of options to be added. It truly is the ultimate in modularity.
- Hand Brake
- Multiple ButtKicker, Earthquake and/or Clark Synthesis shakers
View the Full AP-Xtreme Features Matrix