Home > Products > Simulator Chassis > Pro Chassis >

Ricmotech AP-Xtreme Triple Monitor Chassis Only

Triple Monitor Sim Racing Chassis
Wheel, pedals, shifter, seat and monitors not included. Shown with optional GTpro1 Inverted Pedal Mount.

Alternative Views:

Your Price (USD): $1,795.00
Availability: Made to Order
Ships in: 4-8 Weeks (due to COVID-19 delays)

Item #: APX-3000


The search for the ideal chassis-mounted 3 monitor racing setup is over. The sexy curves combined with modular rails means this chassis looks good while mounting all the gear you can dream of. This chassis is designed to mount triple monitors up to 32 inches max.

Proper Driving Position

Ergonomically Correct

After careful research of race and road performance cars, we found that most other rigs miss the proper driving position. The AP-Xtreme of sim-racing chassis are designed with racing in mind and is therefore created to mimic the proper driving position. Race cars place the seat low to keep the center of gravity as low as possible while placing the pedals directly in front of the hips for maximum control. So don't drive in the "truck driver" position when you are really looking for racing simulation.

Apex Adjustability


While ergonomics brings every part of the controls within the proper range, it all has to be fine-tuned to fit each driver's particular body dimensions. This sim-racing cockpit was created to have all the controls adjustable to within the capabilities adjustable in real race cars. Much the same way that a race car if fitted to the driver, the AP-Xtreme chassis can also be fitted to the driver.

  • Wheel: Up/Down, Front/Back, Tilt
  • Seat: Front Up/Down, Back Up/Down, Slide Front/Back, Recline
  • Pedals: Front/Back, Tilt
  • Shifter: Front/Back
  • Monitor: Up/Down, Front/Back, Side Angle



The Ricmotech AP-Xtreme 3000 was designed to mount virtually any type of sim-racing hardware available, either directly or by the use of an accessory bracket. For example, The stock wheel deck is pre-drilled to mount various wheels while the included pedal deck can mount various pedals in the inverted position.

Wheel deck can mount:

  • Logitech G25, G27, G29 and G920 wheels
  • Thrustmaster T-Series wheels
  • Fanatec Porsche and CSR wheels
  • Fanatec Club Sport wheel without adapter

Shifter plate can mount:

  • Logitech G25, G27 and Driving Force shifter
  • Thrustmaster TH8RS and TH8A shifter
  • Fanatec ClubSport shifter (with Fanatec Clamp)
  • Thrustmaster TSS Sparco Sequential shifter (with optional bracket)
  • Quaife Sequential shifter (with Ricmotech bracket)
  • Quaife H-Pattern shifter (with Ricmotech bracket)

Seat bracket can mount:

  • Simulator seats available from Ricmotech
  • Any Flat bottom aftermarket seat
Pedal deck can mount:
  • Thrustmaster T3PA and T500/T3PA-PRO floor mount pedals*
  • Logitech G25/G27/G29/G920 pedals*
  • Fanatec Clubsport floor mount pedals in inverted position*
  • RealGear GTpro floor mount pedals
  • RealGear GTpro suspended pedals (with optional bracket)
  • Any flat-floor mount sim pedals
*requires modifications to the pedals
Monitor Structure can mount:
  • Monitor angle adjustable from 43 to 60 degrees
  • For monitors up to 20 lbs (10 kg) each
  • Mounts to monitors with VESA 75x75 up to 400x200 mounting patterns.
  • Suitable for 16:9. and 4:3 monitors
  • Triple Monitors up to 32 inches max
Included Extras:
  • Suspension Feet for enhanced effects from tactile transducers and wheels
  • Four Corner Surround Speaker Mounts
  • Media Keyboard Tray
  • Drink Holder

Apex Upgradability


This chassis is designed to be fully upgradable. Not only can you upgrade the wheel pedals and shifter, but you can upgrade to any and all the accessories below. The simplicity of the slotted rails allows a multitude of options to be added. It truly is the ultimate in modularity.

  • Fourth overhead monitor mount
  • Switch and button panel
  • Hand Brake
  • Multiple ButtKicker, Earthquake and/or Clark Synthesis shakers
  • Oculus VR Sensor Mount
  • Instrument cluster

View the Full AP-Xtreme Features Matrix
  • Aluminum and polymer construction
  • Vibration isolation feet
  • Low inertia for higher effectiveness of tactile shakers
  • Fully adjustable pedal, wheel, shifter and seating position
  • Min Length: 62 inches (157.5 cm)
  • Width: Minimum 42 inches (157.5 cm)
  • Height: 38 inches (96.5 cm)

Other Suggested Items
AP-Xtreme 4th Monitor Mounting Post for APX2000 and APX3000 AP-Xtreme Oculus CV1 Sensor Mounting Post for APX2000 and APX3000 AP-Xtreme SlipSense Full-Motion Upgrade for APX1000+ Simulators AP-Xtreme Mounting Bracket for Wilwood Suspended Pedals
Your Price (USD): $145.00
Your Price (USD): $89.50
Your Price (USD): $3,265.00
Your Price (USD): $229.00
Ricmotech 4th Monitor Mounting Post AP-Xtreme Oculus CV1 Sensor Mounting Post Ricmotech APX SlipSense Motion Platform APX Mounting Bracket for Wilwood Suspended Pedals

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 AP-XTREME WIDE TRIPLE CHASSIS September 23, 2020
Reviewer: Thomas Stan from Akron, OH United States  
I could not believe how well this chassis was designed and produced.  It's everything you are ever going to need.  The instructions (which you  download) give the confidence that you can get the job done.  
I will add not to tighten any of the bolts to the max until you're completely done, even after you mount everything.  You'll need to turn on your computer and  see if the screen is right, etc.  I can't tell you how many times I loosened and retightened nuts.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 solid October 23, 2018
Reviewer: Russel Wittenburg from Titusville, FL United States  
solid, straightforward construction, compact

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 June 4, 2018
Reviewer: Mitchell Williams from Springtown, TX United States  
This product performed as advertised because the staff at Ricmotech answered all my many questions.   Post sales support is extremely important when purchasing highly technical equipment.

Was this review helpful to you?