Home > Products >

AP-Xtreme SlipSense Full-Motion Upgrade for APX1000+ Simulators

Ricmotech APX SlipSense Motion Platform


 
Alternative Views:


Your Price (USD): $2,950.00
Compatability: APX-1000, APX-2000, APX-3000
Ships by: Ships in 5 to 10 days


Item #: APX-SSM

Description Technical Specs
 

"Tires do not reach their limit of traction and then all of a sudden break away into the land of skidding and sliding. Sometimes it may feel like that, but they always give you some warning signs. As they reach their limit of adhesion or traction limit, they gradually relax their grip on the road. In fact, primarily due to the elasticity of the rubber, tires have to slip a certain amount to achieve maximum traction. The term used to describe this tire slippage in cornering (lateral acceleration) is called “slip angle” and is measured in degrees. As your cornering forces and speed increase, the tire ends up pointing in a slightly different direction than the wheel is actually pointing. The angle between the direction the tire is pointing and the path the wheel is following is the slip angle."

-Bentley, Ross. Ultimate Speed Secrets: The Complete Guide to High-Performance and Race Driving. Motorbooks International.


Slip Angle


The SlipSense motion upgrade is the next evolution in personal motion racing simulators which allows the driver to thoroughly feel the slip-angle of the rear tires. This unique sensation supplements the sensations felt from a quality force-feedback steering wheel which allows the driver to feel the slip-angle of the front tires. The force-feedback steering wheel combined with SlipSense afford the driver an unprecedented awareness of tire traction. SlipSense is an exclusive add-on motion component for the APX1000, APX2000 and APX3000 racing simulator chassis meticulously designed by Ricmotech.

For a race driver to perform at the highest levels they must be capable of sensing tire traction and slip angle. Proficient drivers can sense traction and slip angle of the front tires by analyzing the direction the car is moving, the amount of steering input and the sensations felt in the steering wheel. Simulators work well to replicate the required feedback to the driver so they can properly access front tire traction and slip angle. However, most simulators, including most motion simulators, fail to provide any feedback to the driver regarding rear tire traction and slip angle. SlipSense was developed to solve this and it solves it exceedingly well.

Slip AngleThe high power, light weight and smooth action of the AP-Xtreme SlipSense system generates instant sensations to help the driver react intuitively. The system is also equipped with passive motion components which create natural motion sensations as the chassis bobs and sways the way a real car does.

The system was designed to move not only the seat, but the entire cockpit including the on-board displays. This full motion concept assures the driver only feels the motion sensations by moving all the visual reference points together. The system even has built-in compensation when used with a VR headset*. The result is a fully immersive experience which improves driver reaction times beyond what was previously achievable.

Why SlipSense is a Better Option than G-Force Motion Simulators
Most simulators on the market today are G-Force simulators. These simulators move the seat or the simulator in such a way as to replicate the movements felt if the driver were sitting in the actual race car. G-forces are generated when a moving car changes speed and direction over the course of several hundred feet, whereas a simulator is only able to move just a few inches. As a result, the forces are scaled down by over 800% and can only be felt for brief instants since the sensations cannot be sustained. These small movements can work well enough to fool the driver into believing they are feeling some G-forces, but they are scaled down too far to allow the human senses to measure them. Since these movements of the simulator cannot be measured by the human senses, they are ineffective at improving driving technique and reducing lap times. G-Force motion simulators are therefore suitable for amusement purposes only.

In contrast, our SlipSense technology concentrates on replicating the sensations felt from tire slip angle. Feeling the sensation of tire traction is far more essential to a skilled driver. As taught by all race driving schools; optimum speed is achieved when the tires are slightly beyond their maximum grip and SlipSense bestows this to the driver in a natural and intuitive form. SlipSense responds to rear tire slip angle with nearly full scale movements and easily allows the driver to feel the angle created between the car and the direction it is moving. When this sensation is combined with a proper force-feedback steering system the driver is able to feel the slip angle of the front tires through the steering wheel and the slip angle of the rear tires through the lateral motion of the cockpit.

SlipSense Equipped APX-3000UW
Ricmotech Commercial Featuring SlipSense
Features
  • Powerful 400 newton actuator for instant motion
  • Needle bearings for minimal friction
  • Lightweight APX chassis for low inertia
  • Passive suspension for 2DOF of additional motion
  • Frame built of aluminum and high-density polymer
  • Extremely low energy consumption
  • Includes powerful SimCommander software for tailoring motion effects
  • Includes SimVibe software to drive tactile shakers
  • Free Ricmotech telephone tech support

Other Suggested Items
Ricmotech AP-Xtreme 3000UW Wide Triple Monitor Bare Chassis Only AP-Xtreme 1000 Sim Chassis Only AP-Xtreme Oculus CV1 Sensor Mounting Post for APX2000 and APX3000 AP-Xtreme 2000 Single Monitor Racing Simulator Chassis Only
Your Price (USD): $2,095.00
Your Price (USD): $1,190.00
Your Price (USD): $89.50
Your Price (USD): $1,450.00
Triple Ultra-Widescreen Sim Racing Chassis AP-Xtreme 1000 Racing Simulator Chassis AP-Xtreme Oculus CV1 Sensor Mounting Post Single Monitor Racing Simulator Chassis

Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
SlipSense March 13, 2018
Reviewer: Marty Spears from Hays, NC United States  
Awesome product. Very well built.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Rear traction feedback! March 1, 2018
Reviewer: Eric Pennington from Indianapolis  
I tried this setup at the Performance Racing Industries trade show.  It gives you exactly what the intent of the product states, rear slip angle feedback.  You don't need a huge motion sim, just this gives you that missing piece from a stationary rig, at a very reasonable price.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
January 11, 2018
Reviewer: Bill Handler from Palm Beach Gardens, FL United States  


Was this review helpful to you?