Home > Products >

AP-Xtreme Single Monitor Racing Simulator Chassis Only

Single Monitor Racing Simulator Chassis
Wheel, pedals, shifter, seat and monitor not included


 
Alternative Views:


Your Price (USD): $1,450.00
Availability: Made to Order


Availability: Usually Ships in 3 to 5 Days
Item #: APX-2000


Color*:


 
Description
 

The search for the ideal chassis mounted single monitor chassis is over. The sexy curves combined with modular rails means this chassis looks good while mounting all the gear you can dream of. Down the road, this chassis easily converts to a triple monitor rig by simply adding the monitor K-structure.


Proper Driving Position

Ergonomically Correct

After careful research of race and road performance cars, we found that most other rigs miss the proper driving position. The AP-Xtreme 2000 is designed with racing in mind and is therefore created to mimic the proper driving position. Race cars place the seat low to keep the center of gravity as low as possible while placing the pedals directly in front of the hips for maximum control. So don't drive in the "truck driver" position when you are really looking for racing simulation.

Apex Adjustability

Adjustability

While ergonomics brings every part of the controls within the proper range, it all has to be fine-tuned to fit each driver's particular body dimensions. The AP-Xtreme was created to have all the controls adjustable to within the capabilities adjustable in real race cars. Much the same way that a race car if fitted to the driver, this chassis can also be fitted to the driver.

  • Wheel: Up/Down, Front/Back, Tilt
  • Seat: Front Up/Down, Back Up/Down, Slide Front/Back, Recline
  • Pedals: Front/Back, Tilt
  • Shifter: Front/Back
  • Monitor: Front/Back, Up/Down

Compatability

Compatibility

The AP-Xtreme chassis was designed to mount virtually any type of sim-racing hardware available, either directly or by the use of an accessory bracket. For example, The stock wheel deck is pre-drilled to mount various wheels while the included pedal deck can mount various pedals in the inverted position.



Wheel deck can mount:

  • Thrustmaster T-series wheels
  • Logitech G25, G27 and G29 wheels
  • Fanatec Porsche and CSR wheels
  • Fanatec Club Sport wheel without adapter
  • AccuForce steering wheel
  • Clark Synthesis tactile transducer

Shifter plate can mount:

  • Logitech G25, G27, and Driving Force shifter
  • Thrustmaster TH8RS and TH8A shifter
  • Fanatec ClubSport shifter (with optional bracket)
  • Thrustmaster TSS Sparco Sequential shifter (with optional bracket)
  • Quaife Sequential shifter (with optional bracket)
  • Quaife H-Pattern shifter (with optional bracket)

Seat bracket can mount:

  • Simulator seats available from Ricmotech
  • Any Flat bottom aftermarket seat

Pedal deck can mount:

  • Inverted Logitech G25/G27/G29/G920 pedals*
  • Inverted Thrustmaster T500RS/T3PA-PRO and T3PA pedals*
  • RealGear GTpro suspended pedals (with optional bracket)
  • RealGear GTpro floor mount pedals
  • Fanatec Clubsport floor mount pedals in inverted position*
  • Any flat-floor mount sim pedals

Monitor Mount:

  • Monitors and TVs up to 47 inches diagonal (32" TV shown)
  • Mounts to monitors with VESA 75x75 up to 200x400 mounting patterns.
  • For monitors up to 80 lbs (40 kg)

Included Extras:

  • Suspension Feet for enhanced effects from tactile transducers and wheels
  • Four Corner Surround Speaker Mounts
  • Media Keyboard Tray
  • Drink Holder

*some modification to pedals required

Apex Upgradability

Upgradability

This chassis is designed to be fully upgradable. Not only can you upgrade the wheel pedals and shifter, but you can upgrade to any and all the accessories below. The simplicity of the slotted rails allows a multitude of options to be added. It truly is the ultimate in modularity.

  • Triple on-board monitor mount
  • Overhead monitor mount
  • Switch and button panel
  • Hand Brake
  • Multiple ButtKicker, Earthquake and/or Clark Synthesis shakers
  • VR Sensor Mount
  • Instrument cluster


View the Full AP-Xtreme Features Matrix
Features
  • Aluminum and polymer construction
  • Vibration isolation feet
  • Low inertia for higher effectiveness of tactile shakers
  • Fully adjustable pedal, wheel, shifter and seating position
  • Min Length: 62 inches (157.5 cm)
  • Width: up to 34 inches (86.5 cm)
  • Height: 38 inches (96.5 cm)

Other Suggested Items
AP-Xtreme 4th Monitor Mounting Post for APX2000 and APX3000 AP-Xtreme Oculus CV1 Sensor Mounting Post for APX2000 and APX3000 AP-Xtreme Mounting Bracket for Wilwood Suspended Pedals AP-Xtreme SlipSense Full-Motion Upgrade for APX1000+ Simulators
Your Price (USD): $145.00
Your Price (USD): $89.50
Your Price (USD): $229.00
Your Price (USD): $3,265.00
Ricmotech 4th Monitor Mounting Post AP-Xtreme Oculus CV1 Sensor Mounting Post APX Mounting Bracket for Wilwood Suspended Pedals Ricmotech APX SlipSense Motion Platform

Share your knowledge of this product. Be the first to write a review »