Home > Products > Brackets & Cables >

VESA SnapMount Monitor Bracket for Aluminum Profile

SnapMount Bracket for 80/20


 
Alternative Views:


Your Price (USD): $49.95


Availability: Usually Ships in 1 to 2 Days
Item #: RMT-SM200-TSLOT

Description Technical Specs
 
These SnapMounts allow you to mount your monitor or TV to 15-series or 40-series 80/20 or T-slot aluminum profile extrusion. Highly recommended for users that will likely be removing and reinstalling their monitors often. These brackets make it a snap to adjust the monitors just right on your self built triple monitor rig. These brackets will let you snap off the monitors to gain access to moving the mounting location to get the monitors in perfect alignment. They also include spacer washers to permit compensating for drooping monitors. This bracket will support monitors or TVs up to 47 inches. They feature VESA standard mounting locations at 75x75, 100x100, 100x200, 200x100, 200x200 and 200x400.  At about 1 inch from the mounting surface, these brackets will keep your monitors tucked close the mounting rails while still allowing room for cable connections. It will support monitors up to 55 pounds.

This mount features a 2-piece design made of solid steel which allows the monitor to be easily removed for transporting the simulator. Includes adapter brackets, metric screws for fastening to the monitors, screws for securing to the adapter bracket. Mounting screws to the 80/20 rail are not included..

Average Rating: 4.5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
Easy May 16, 2018
Reviewer: Shawn LaPlante from Oakdale, MN United States  
These are so easy to use. Easy to take the monitor off and put it back on when you need to

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
It worked, but it could have been better May 9, 2018
Reviewer: from Waukegan, IL United States  
I was using this product to mount video monitors to 80/20 extruded aluminum. I was surprised to find that there was no 80/20 hardware included. Fortunately, I had my own. The packing of the items caused the boxes containing the product to be crushed. If I would have needed to return it, I would have been out of luck.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
Good quality, no 80/20 hardware April 17, 2018
Reviewer: Jeff W from Waukegan IL  
Looks like a good product, and will work in my application (mounting monitors to 80/20 extrusion for a trade show display.) Only one problem: the hardware needed to attach this product to the aluminum extrusion channel isn't included. Fortunately I have some, but if I didn't this product would be non-functional. Packages were less than perfectly packed so they crushed in shipping, but that's not a big deal unless I planned to return them.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Product. April 9, 2018
Reviewer: JC from Marlborough , MA United States  
Very solid product and would definitely purchase again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
SnapMount brackets January 11, 2017
Reviewer: Stephen Thomas from Midland, TX United States  
These monitor brackets are great for aluminum 80/20 extrusion tubing.  If you are going to be mounting/removing monitors with any amount of frequency, these are excellent.  Probably wouldn't work as well if the monitors are mounted on the same rig as your wheel/pedals or a motion rig as they do have a little bit of wiggle.  I have a dedicated monitor mounting platform and these work perfectly.

Was this review helpful to you?

View All Customer Reviews