RS3 DIY Triple Monitor Mount Plans and Templates (fits RS1 & RS500)

5 Review(s) Write a Review

Your Price: $19.95

Add triple screens to your DIY build

Part Number: RMT-RS3-DIY

Availability: In Stock

Delivery: Shipping or In-Store Pickup

Quantity

Description
Customer Reviews
Features
Specifications
Support

You asked and we delivered. Finally there is a do-it-yourself option for adding triple monitors to the RS1-DIY or the RS500-DIY.

Have you wanted a robust racing simulator cockpit that can hold three monitors in a wrap-around configuration? The RS1 is that cockpit. Unlike most commercially available racing cockpits that wiggle and cannot withstand the weight of triple monitors and hold them steady for you while you race in your favorite sim-racing game, the RS1 is rock solid. So, it was only natural that we take advantage of that sturdiness and create a DIY triple monitor mount for it.

The RS3-DIY is a triple display holder you build yourself out of 3/4 inch thick MDF to upgrade your existing RS1-DIY or RS500-DIY simulator. The plans include cutting templates and a step-by-step instruction book just like our RS1-DIY sim-racing cockpit plans. This triple monitor holder is robust enough to support up to three 27 inch inch monitors weighing up to 20lbs each. By using three identical monitors, the self-aligning design of the RS3-DIY will place your monitors perfectly aligned, and butted edge-to-edge. The angle of the side monitors has been carefully worked out to optimize the viewing angle to the driver no matter which size monitors you use. The monitors mount to the RS3 using the monitors own VESA 100 mounting provisions to make sure the monitors are firmly supported. For users that prefer to tuck the side monitors behind the center monitor to help conceal the bezel, there is an option on the templates to build the brackets that way (this feature requires monitors that do not exceed 1.25 inches of thickness at the edges of the monitors).

The RS1 sim-racing cockpit has already been touted as one of the most rigid designs among both DIY and commercially made gaming simulators available. All that strength and rigidity is what allows us to offer this unique option. The strength and stability of the RS1 is what allows a triple monitor stand to me mounted safely, do not try this with any other racing simulators on the market. The RS3 triple monitor brackets added to the RS1 or RS500 creates one of the only all-in-one designs on the market today.

This item is not returnable.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.6

RS3 DIY Triple Monitor Mount Plans and Templates

These plans provide an extremely sturdy and economical means to mount 3 monitors to your RS1. Saved hundreds over a comparable steel mount. The plans make it easy if you have any woodworking experience. Take your time sanding, several of the pieces must be exactly the same size for everything to line up perfect. I also highly recommend the SnapMount Brackets.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Jeff Cypert from Waco, TX United States on 12/7/2014 10:04:00 PM

Perfect

This set of plans could not be easier to use, A great addition to the RS-1 rig!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Joe Pacella from Fremont, CA United States on 3/9/2014 5:24:00 PM

Triple monitor review

I havent tried the triple monitor stand yet because I found out after I ordered it that only way to use 3 monitors is through a PC and all I have ATM is an Xbox one .

Did you find this helpful?

Reviewed by: Mike pittman from Beckley WV on 2/13/2021

TV mount

I only built and installed the back mount for the time being. I reinforced the back because i'm using a 40 inch TV. The complete project was fun to build. I modified a lot of the project to suit the kids.

Did you find this helpful?

Reviewed by: Alvis Jenkins from Middle River, MD United States on 12/28/2015 9:17:00 PM

RS3 Standalone

I purchased the plans and built my RS3 as a stand alone triple screen mount, adjustable for vertical travel. Excellent easy to follow plans. My only gripe is that 3/4 MDF is freakin heavy material, but easy to work with and seems durable enough as long as its' not subject to being moved on a regular basis. If I do it again, I'll use a lighter weight material? I used 3, 32 thin bezel flat panels and they mount/line up perfectly.

Did you find this helpful?

Reviewed by: Jason Potter from Denver, CO United States on 3/12/2015 11:32:00 AM

Clark Synthesis Silver Tactile Transducer

$239.95

(1)

Ricmotech 11 Inch Decal - Pair

$4.45

(10)

RS3 DIY Triple Monitor Mount Plans and Templates (fits RS1 & RS500)

Accessories