These SnapMounts allow you to mount your monitor or TV to 15-series or 40-series 80/20 or T-slot aluminum profile extrusion. Highly recommended for users that will likely be removing and reinstalling their monitors often. These brackets make it a snap to adjust the monitors just right on your self built triple monitor rig. These brackets will let you snap off the monitors to gain access to moving the mounting location to get the monitors in perfect alignment. They also include spacer washers to permit compensating for drooping monitors. This bracket will support monitors or TVs up to 47 inches. They feature VESA standard mounting locations at 75x75, 100x100, 100x200, 200x100, 200x200 and 200x400. At about 1 inch from the mounting surface, these brackets will keep your monitors tucked close the mounting rails while still allowing room for cable connections. It will support monitors up to 55 pounds.
This mount features a 2-piece design made of solid steel which allows the monitor to be easily removed for transporting the simulator. Includes adapter brackets, metric screws for fastening to the monitors, screws for securing to the adapter bracket. Mounting screws to the 80/20 rail are not included..