The base plate for the Ricmotech GTpro3 pedal set makes it easy to mount the pedals in your rig. The pedals mount to the base in one of two positions. The two positions place the heel stop for use with Formula, Prototype, or GT driving positions. The elevated heel plate positions the ball of the driver's foot at the right height to take full advantage of the four height positions available on the GTpro3 pedal faces.
The heel stop is an extruded design intended to resist bending. The surfaces feature a tumbled finish that is smooth and resists showing scratches and scuffs. Screws are provided to mount the pedals to the base plate. Screws to mount the base plate to your chassis are not provided since chassis differ. The plate is pre-drilled in the corners for M6, M8, 1/4" and 5/16" bolts.
Designed exclusively for the RealGear GTpro3 Xtreme Tilton floor mount 3-pedal set.
